Boat Leveler 10" x 8" Trim Tab Set - N108000 @ Choice Marine

Choice marine offers the Boating parts with amazing Features.

1. Hose: Rated at 2000 lb. burst pressure, 15' of hose is supplied for your system. Stainless steel clamps hold the hose to barb fitting at the solenoid.

2. Wiring: meets federal standards for heat, pull and insulation, they are Color-coded wiring in 25' to 40' lengths with quick connects fittings, making installation easy.

3. Solenoids: custom designed, epoxy sealed and humidity resistant which prevents being shorting out. Eliminating drift back the solenoids lock the tabs in any position.

4. Cylinders: Impact resistant, eliminates high and low pressure leaks, fiberglass reinforced nylon cylinders, two expanding type seals, plus O-ring. A stainless steel spring retracts the cylinder when the boat is not in motion.

5. Brackets: Swivel type brackets allow cylinders to be mounted an adjusted to any angle. Knockout pins act as shear pins it tab strikes an object.

6. Pump: Amperage doesn't exceed 16, the built-in bypass is factory set at 400 P.S.I. tolerance held to .00025.

7. Trim Tabs: 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. Insta-Trim's hinges prevent most spray and can be used for transom or bottom mounting.

8. Rocker Type Controls: Mounted on the dash they are easy to operate. 2TP Micro switch with silver contact points adjust the tabs for maximum control and performance.

9. Motor Cover: high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. The cover protects the motor from occasional wash down.

10. Motor: The motor is mounted with stainless steel nuts and bolts, and is easily disassembled. Resists temperature and amperage build-up.

PatrickMoon`s Uploads

    This user didn't upload any Music or Audio file yet...
  • PatrickMoon
  • profile viewed 12 times
  • message share profile