Overview of Servetec SV100 High Capacity Thermostat
SV100 thermo-regulator can save up the energies, which controls the temperature, by the device that is used in energy heating system. User can choose the required temperature heating system through temperature sensor, also by using micom, even when the temperature sensor is detached or not active, user can maintain the temperature heating system. This thermo-regulator is using high capacity (6kW), so it can control large area at once.
SV100 is specially designed thermo-regulator for places that needs high capacity (6kW)
• Thermostat SV100
• Temperature Sensor (option)
• Remote Control (option)
• Installation Instructions
• Cover Box
• Power Supply - 85VAC — 265VAC (SMPSI, 50/60Hz
• Output Relay - 27A [Resistance Load] / 6, 000 w [6.0kW]
• Ambient temperature - 0 / +50°C
• Temperature Range 0 / + 99°C
• Floor Sensor - NTC Thermistor at 25°C 5k0, 2m
• Timer Phase & Cycle - 1-7 Phases, 1-10 Phases / 1-60 min
• Period External Materials & Size - Flammable ABS / 115 [W] x 115 [H] x 33 [D]
• Thermostat SV100is an exclusive electric heating device with maximum load of 6.0kW / 220VAC.
• Power (220 / 230 VAC), Load, and Sensor part must be wired only then you can power supply it, and depending on electric load you should use different size of input/output wires.
• Press ON / OFF button only once.
• Use UP / Down button to pick appropriate temperatures, after 3 seconds it will automatically setup, or after choosing appropriate temperature press UP / DOWN button together to set it.
• Temperature setting range is: Min 0°C — Max. 99°C (initial setting is Min 0°C — Max 60°C), Operating Temperature is +2°C ON,-1°C OFF from Set up Temperature.
• In case if sensor gets disconnected, it will automatically switch to inner timer. Timer operates by periodic table. Please take reference of timer's periodic table.
• For the safety, please install circuit breaker on the flyer part of the thermostat
• Remote control has ON and OFF button separately. Press UP/DOWN button to set the appropriate temperature after 3 seconds it will automatically apply it, or user can set an appropriate temperature and then press the setting button in order to set it. Remote control is a separate device, so it will only work on thermostats with remote control types. Please know that this remote control is a battery (2A, 2EA) using type device. If there is no LED light showing when the button is pressed, then change the battery please
Servetec, one of the leading Temperature control system manufacturer in Korea offers products are Basic Thermostats, Communication System Thermostats, Digital Thermostats, Europe Type Thermostats, OEM / ODM Thermostats, SENSORS with High Quality, Functionality, Design and Customized service. To buy warmup thermostat system check out servetec.co.kr/en
- profile viewed 10 times